Storage/Thermal Sim Methodology: Difference between revisions

From OpenCompute
Jump to navigation Jump to search
Line 4: Line 4:
Welcome to the OCP '''Thermal Sim Methodology''' workstream page
Welcome to the OCP '''Thermal Sim Methodology''' workstream page


The Thermal Sim Methodology goal is to standardize aspects of thermal characterizations of drives and systems to enable drive and system designers to use common methods, metrics, and assumptions when designing for thermal targets required by end-users.  Goal is to enable both "apples-to-apples" comparison of drives in a system, and also to enable the ecosystem to better anticipate thermal requirements of new form factors being considered by the ecosystem.
The Thermal Sim Methodology will try to standardize aspects of the thermal characterization of drives and systems to enable drive and system designers to use common methods, metrics, and assumptions when designing for thermal targets required by end-users.  The goal of the methodology is to enable both "apples-to-apples" comparison of drives in a system, and also to enable the ecosystem to better anticipate thermal requirements of new form factors being considered by the ecosystem.


Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP [http://www.opencompute.org/about/ocp-policies/ OCP Policies] page.  If you have any questions please contact OCP.
Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP [http://www.opencompute.org/about/ocp-policies/ OCP Policies] page.  If you have any questions please contact OCP.

Revision as of 22:48, 24 July 2020

OCP-Open-compute-archival-storage-1x-v1-38a.png

WELCOME

Welcome to the OCP Thermal Sim Methodology workstream page

The Thermal Sim Methodology will try to standardize aspects of the thermal characterization of drives and systems to enable drive and system designers to use common methods, metrics, and assumptions when designing for thermal targets required by end-users. The goal of the methodology is to enable both "apples-to-apples" comparison of drives in a system, and also to enable the ecosystem to better anticipate thermal requirements of new form factors being considered by the ecosystem.

Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP OCP Policies page. If you have any questions please contact OCP.

Links

- Storage Project Mailing List
- OCP website
- OCP Calendar

Leads

- Dave Landsman (Western Digital)

Documents

- Thermal Workgroup Goals
- E3 Thermal Methodology Slides
- EDSFF Thermal Sim Spec Outline Doc
- Intel-WDC-Microsoft - SSD Thermal Simulation Standardization

Meetings

Meeting Information: Every Thursday at 3pm-4pm US Pacific Time, though Thursday, August-27

You can also dial in using your phone. United States: +1 (646) 749-3122

Access Code: 881-571-341

Recordings from Past Calls

- July 23rd, 2020
- July 16th, 2020
- June 25th, 2020
- February 27th, 2020
- February 20th, 2020
- February 13th, 2020
- February 6th, 2020