TAP Instrumentation: Difference between revisions

Revision as of 22:27, 16 December 2021

Open source ecosystem for instrumentation and measurement software and tools. Scalable, reliable, cost-effective and efficient.

- Lead: Anand Ram (Calnex)

	Design	Objective
#1	Time Card based PPS measurement	Scaleable use of the Time Card in a generic server to perform up to 4 PPS measurements

	Design	Objective
#1	Time Card based PPS measurement	Interface with Time Card driver and export PPS measurement data in a useful format

	Core Hardware	Objective
#1	TDC	Small, cheap, and low power use-case
#2	PTM controller	A PCIe based daughter card that can be synchronized with a high stability source (Time Card) over PCIe to scale PPS measurements
#3	UWB	A method for distributing GPS and time to areas where measurements are made, but GPS is not available
#4	DPLL	A discrete design based around a DPLL , removing the need for an FPGA

@@ Line 12: / Line 12: @@
 ==Recording from Past Calls==
-=Hardware Roadmap=
+==Hardware Roadmap==
-Initial Proof of Concept based on Time Card for PPS measurement
-=Software=
+{| class="wikitable"
-Integrate Time Card timestamping for data collection and export
+|-
+!
+! Design !! Objective
+|-
+| '''#1'''
+| Time Card based PPS measurement
+| Scaleable use of the Time Card in a generic server to perform up to 4 PPS measurements
+|-
+|}
-==Potential Future Solutions==
+==Software==
 {| class="wikitable"
+|-
+!
+! Design !! Objective
+|-
+| '''#1'''
+| Time Card based PPS measurement
+| Interface with Time Card driver and export PPS measurement data in a useful format
 |-
+|}
+==Potential Future Hardware Solutions==
+{| class="wikitable"
+|-
 !
 ! Core Hardware !! Objective