Revision as of 17:20, 16 December 2021 (view source) TAPwiki (talk | contribs) ← Older edit		Revision as of 17:22, 16 December 2021 (view source) TAPwiki (talk | contribs) (→‎Potential Future Solutions) Newer edit →
Line 19:		Line 19:
	==Potential Future Solutions==		==Potential Future Solutions==
		+
		+	{| class="wikitable"
		+	|-
		+	!
		+	! Core Hardware !! Objective !! Status
		+	|-
		+	| '''#1'''
		+	| TDC
		+	| Small, cheap, and low power use-case
		+	|-
		+
		+
	1. TDC based design, targeting small and cheap use-case.		1. TDC based design, targeting small and cheap use-case.
	2. PTM based design, to synchronize multiple measurement daughter cards with a high stability source over PCIe		2. PTM based design, to synchronize multiple measurement daughter cards with a high stability source over PCIe
	3. UWB based design, targeting locations where GPS is not available at point of measurement		3. UWB based design, targeting locations where GPS is not available at point of measurement
	4. DPLL based design, targeting non-FPGA use case		4. DPLL based design, targeting non-FPGA use case

---

Revision as of 17:22, 16 December 2021

Instrumentation and Measurement - Workstream #6

Time Appliances Project

Objective

Open source ecosystem for instrumentation and measurement software and tools. Scalable, reliable, cost-effective and efficient.

Project Team

- Lead: Anand Ram (Calnex)

- Lead: Julian St James (Meta)

Recording from Past Calls

Hardware Roadmap

Initial Proof of Concept based on Time Card for PPS measurement

Software

Integrate Time Card timestamping for data collection and export

Potential Future Solutions

1. TDC based design, targeting small and cheap use-case. 2. PTM based design, to synchronize multiple measurement daughter cards with a high stability source over PCIe 3. UWB based design, targeting locations where GPS is not available at point of measurement 4. DPLL based design, targeting non-FPGA use case

	Core Hardware	Objective	Status
#1	TDC	Small, cheap, and low power use-case