Difference between revisions of "Hardware Management/Hardware Management Module"

From OpenCompute
Jump to: navigation, search
(Created page with "right ==Welcome== :Welcome to the OCP '''Hardware Management Module''' Sub-project. This is a sub-project of the [https://www.op...")
 
(Sub-Project Leadership)
Line 15: Line 15:
 
==Sub-Project Leadership==
 
==Sub-Project Leadership==
  
:- [mailto:eric.shobe@ocproject.net Eric Shobe] (Dropbox), {mailto:jared.mednick@ocproject.net Jared Mednick] (Dropbox)  
+
:- [mailto:eric.shobe@ocproject.net Eric Shobe] (Dropbox), [mailto:jared.mednick@ocproject.net Jared Mednick] (Dropbox)
  
 
==Get Involved==
 
==Get Involved==

Revision as of 15:31, 27 August 2020

OCP-hardware-management-v1-17a3x.png

Welcome

Welcome to the OCP Hardware Management Module Sub-project. This is a sub-project of the OCP Hardware Management Project
This Project is open to the public and we welcome all those who would like to be involved.
Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP OCP Policies page. If you have any questions please contact OCP.

Project Overview

The management controller module separates the common platform management hardware and places them behind a connector. the module is specified by its connector pin-out The module may have one or more form-factors

Sub-Project Leadership

- Eric Shobe (Dropbox), Jared Mednick (Dropbox)

Get Involved

Participate in the discussion, mailing list: Mailing List Info
Participate in HW Management Module sub-project meetings
- OCP Calendar