Hardware Management/Hardware Management Module: Difference between revisions

From OpenCompute
Jump to navigation Jump to search
Line 44: Line 44:
| style="width: 100pt; text-align:center;" | 08/15/2020
| style="width: 100pt; text-align:center;" | 08/15/2020
| style="width: 150pt; text-align:center;" | Dropbox, Salesforce  
| style="width: 150pt; text-align:center;" | Dropbox, Salesforce  
| style="width: 100pt; text-align:center;" | [http://files.opencompute.org/oc/public.php?service=files&t=1a8598b04f84c94c9c01afc999e9cee4 Download]
| style="width: 100pt; text-align:center;" | [https://www.opencompute.org/documents/ocp-runbmc-daughterboard-card-design-specification-v1-4-1-pdf Download]


|}
|}

Revision as of 17:42, 23 September 2020

OCP-hardware-management-v1-17a3x.png

Welcome

Welcome to the OCP Hardware Management Module Sub-project. This is a sub-project of the OCP Hardware Management Project
This Project is open to the public and we welcome all those who would like to be involved.
Disclaimer: Please do not submit any confidential information to the Project Community. All presentation materials, proposals, meeting minutes and/or supporting documents are published by OCP and are open to the public in accordance to OCP's Bylaws and IP Policy. This can be found on the OCP OCP Policies page. If you have any questions please contact OCP.


Charter

This Subproject creates designs and specifications to enable interoperable hardware for platform manageability, in the form of System on a Module (SOM) designs. Deliverables from this project will include:

  • Specification for the interface between the System on a Module and the underlying platform
  • Design guides for platform designers wanting to use the module
  • Designs for reference modules and carrier cards

Project Overview

The management controller module separates the common platform management hardware and places them behind a connector. the module is specified by its connector pin-out The module may have one or more form-factors

Sub-Project Leadership

- Eric Shobe (Dropbox)
- Jared Mednick (Dropbox)
- Mailing List

Release Candidate (RC) Docs

Name Format Version Date Contributor Link
OCP RunBMC DaughterBoard Card Design Specifications PDF 1.4.1 Final 08/15/2020 Dropbox, Salesforce Download

Accepted Hardware

Shared Hardware specifications still under review

PLEASE NOTE THESE HAVE BEEN SHARED WITH THE COMMUNITY AND ARE STILL UNDER REVIEW BUT NOT YET ACCEPTED BY THE IC

Alpha SNC-60x0-486F (Mont Blanc) - 48x25G switch with 6x100G uplinks using Tomahawk+ (BCM56963)

  • Latest version/spec: Specification v0.1
  • Slides used for presentation: slides
  • License: OCPHL - Permissive
  • Spec status: Shared/community reviewed- Feb 13, 2017
  • Contact: Robert Chu



Get Involved

Participate in the discussion, mailing list: Mailing List Info
Participate in HW Management Module sub-project meetings
- OCP Calendar