=====================================================================
		Firmware update procedure
=====================================================================
	1. Update BMC FW via In-Band command line:
		a) in Window, run "win.bat"
		   in Linux, run "linux.sh"

	2. Update BMC FW via Out-of-Band command line:
		a) in Window, run "win_oob.bat <BMC IP>"
		   in Linux, run "linux_oob.sh <BMC IP>"

===============================================================
    S2N AST2400 BMC FW v3.11 release note
===============================================================
BMC FW Version: v3.11
Date:			2016/08/03
Hardware Platform:	AST2400
Quanta Subversion Revision: 52266
Associate Platform:
  Suggestion BIOS Version:		3B05 or above

Utility:
1. Yafuflash (version 4.16.08)

Firmware Images:
   S2N_2400_v311.bin 	with checksum-32 0x54B59670
   S2N_2400_v311.bin	with MD-5 0xF0A2A5BC74EFF496330551C4E3A79A8D
   S2N_2400_v311.bin_enc	with checksum-32 0x54B5D741
   S2N_2400_v311.bin_enc	with MD-5 0x21866FD260532A77C438F8457E16710C
FSC version: 

Bug Fix:
180441 : [PVT] The Intel DCM4.1 will show error message when add SUT under WIN2012 R2(Please refer attached file).
182463 : [PVT]Admin user privilege cant modify rKVM Timeout Setting as 1000sec under WebUI.
182802 : [REG] Use (SNMP) MibBrowser to get temperatureDeviceInfoTable and voltageDeviceinfoTable, there're some sensors will be ''unknown(2)'' in tables.
182988 : [REG] SNMP : Mib Browser Get temperatureStatusList data, the result is incorrect.
178763 : [PVT]Use SNMP to get Fan sensor status will show Unknown or empty.
182995 : [Reg.] The user password should not allowed to be shorter than 4 bytes
183344 : [Reg.]Update BIOS via BMC Web UI will display failed. (With Preserve NVRAM option.)
183506 : [REG] Some voltage sensors' LC and UC don't match BMC spec. rev 005.
183589 : [Reg]BMC Firmware Revison in WebUI Dashboard doesn't match BMC_FW_DesignStandard_For_AST2X00Spec v2.01
183741 : [REG]After NMI button is locked by IPMI command, pressing NMI button will still be recorded on BMC SEL as Critical Interrupt.
183950 : [Reg]SNMP Community default settings[Read-Only Commuity String]&[Read-Write Community String] is blank.
184442 : [REG] WebUI - Username can input '-' (hyphen), '_' (underscore) and, '.' (dot) in the suffix, this format mismatches with BMC Std Spec. v2.13.
184481 : [REG] PEF - Alert SNMP Trap packet content cannot match BMC spec. rev005 : 2.18.1.3. PET Variable Binding Format.
176706 : [S2N] RKVM disconnected and shows ''Invalid session token. Authentication failure'' after OS reboot cycle 60hrs. (via OCP mezz card shared-NIC)
181507 : [PVT]Sometime RKVM shows ''Invalid Session token. Authentication failure'' message after the long term test.
182821 : [REG] There are ''Close Session command failed: Unknown (0x80)'' when run SOL Bi-direction Stress test
184261 : [Reg.]Virtual USB device unmounts itself during stressing virtual devices with Winthrax tool.


New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ

===============================================================
    S2N AST2400 BMC FW v3.10 release note
===============================================================
BMC FW Version: v3.10
Date:			2016/06/16
Hardware Platform:	AST2400
Quanta Subversion Revision: 51057
Associate Platform:
  Suggestion BIOS Version:		3B05 or above

Utility:
1. Yafuflash (version 4.16.08)

Firmware Images:
   S2N_2400_v310.bin 	with checksum-32 0x54B971E0
   S2N_2400_v310.bin	with MD-5 0x6FB19732FEEBFD2661647CF9BB907AF3
   S2N_2400_v310.bin_enc	with checksum-32 0x54B9B8AA
   S2N_2400_v310.bin_enc	with MD-5 0x0C7E4961B5FCEF1750C391A8B30F2A6E
FSC version: 

Bug Fix:
179066 : [PVT]Suggest align the SEL.txt / SEL_Hex.txt format as S3A, that will easier to check the SEL download files.
180618 : [PVT] BMC have multi DIMM VR & CPU VR temp sensor. But HW SPEC only defined one.
180654 : [PVT] AC cycling BMC log abnormal ''OEM record'' , ''SSD rebuild'' & ''GPU Power upper critical'' event. (password : s2n)
181223 : [PVT] After install OS via virtual CD media,BMC log Unspecified event : ''OS Boot - Unspecified event''
181417 : [PVT]WEBUI doesn't diconnected and not show ''Closing the web session during firmware flash device to be restarted.'' after entering updated mode over 15mins and refreshing WEBUI.
181861 : [PVT]There are 5 medium and high risks about SSL, SSH, and IPMI V2.0 password in Nessus Vulnerability Scanner Report.
181157 : [PVT]SEL doesn't logged watchdog timeout and cold reset events after entering updated mode over 15mins and watchdog timeout.
181134 : [PVT]Sometimes BMC port will become share-NIC(OCP) from dedicated-NIC after reboot cycle.
180605 : [PVT] Somtimes, power button can not work.
179978 : [PVT]Setup the PEF and make power diag, BMC will not send the SNMP trap or Alart Mail to Trap Viewer or Web Mail
176758 : [PVT] The Result show FAILED during 5 cycle when execute the Cold Reset cycle test.
176474 : [PVT] The Some items result show failed when excute the QICTS V0.12 OutBand Script.(pw:s2n)



New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ


===============================================================
    S2N AST2400 BMC FW v3.09 release note
===============================================================
BMC FW Version: v3.09
Date:			2016/05/27
Hardware Platform:	AST2400
Quanta Subversion Revision: 50512
Associate Platform:
  Suggestion BIOS Version:		3B05 or above

Utility:
1. Yafuflash (version 4.16.08)

Firmware Images:
   S2N_2400_v309.bin 	with checksum-32 0x54C91A41
   S2N_2400_v309.bin	with MD-5 0x0B45358BCEB47D28188E6902884FB9DD
   S2N_2400_v309.bin_enc	with checksum-32 0x54C95811
   S2N_2400_v309.bin_enc	with MD-5 0x6AC0DC353A9D8EEE1A7E99620434E14D
FSC version: 

Bug Fix:
180974 : [PVT] BMC WebUI events transition function for OEM event lots of didn't work
180972 : [PVT] After update ME under OS, BMC will log SPS FW health event. But this event severity not correct. Should be ''information'' not ''critical''.
180618 : [PVT] BMC have multi DIMM VR & CPU VR temp sensor. But HW SPEC only defined one.
179912 : [PVT]Get VR Version command is failed (Res: 0xc1)
179869 : [PVT]Yafuflash OOB update script is failed to update BMC.


New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ


===============================================================
    S2N AST2400 BMC FW v3.08 release note
===============================================================
BMC FW Version: v3.08
Date:			2016/05/20
Hardware Platform:	AST2400
Quanta Subversion Revision: 50364
Associate Platform:
  Suggestion BIOS Version:		3B05 or above

Utility:
1. Yafuflash (version 4.16.04)

Firmware Images:
   S2N_2400_v308.bin 	with checksum-32 0x54B9C6C6
   S2N_2400_v308.bin	with MD-5 0x7FF1894F7909956F75563F5BBF44CE6B
   S2N_2400_v308.bin_enc	with checksum-32 0x54BA0927
   S2N_2400_v308.bin_enc	with MD-5 0xE1DC81BA3B35E1CEDEAD491B904D716A
FSC version: 

Bug Fix:
176706 : [S2N] RKVM disconnected and shows ''Invalid session token. Authentication failure'' after OS reboot cycle 60hrs. (via OCP mezz card shared-NIC)
180078 : [PVT]Mount virtual device to SUT and run the wintrax to stress virtual devices will failed.
180198 : [PVT]Remote Control is failed when running SRMT
180419 : [PVT]The Response will shows ''Invalid'' when execute the Get and Set SNMP Test Trap Configuration via IPMI command.(please refer picture file)
180012 : [PVT]Get / Set SNMP Community String via IPMI command is failed
180519 : [PVT] Temp sensor up critical event severity is ''warning''. According to Event table V2.10 should be ''Critical''.
180509 : [PVT] FAN uninstall event severity is ''warning''. But amber LED didn't light and SPEC also didn't defined it.
180506 : [PVT] Fan low / high critical event severity is ''Warning''. It should follow Event table 2.10 as ''Critical''.
180491 : [PVT] BMC record voltage up/low critical event severity is ''warning''. But follow QCI Event table V2.10 it should be ''critical''.
180317 : [PVT] The BMC IP should not be ''0.0.0.0'' when set DHCP server is disable.
180412 : [PVT]The execute the Get Server Node Health Status command is not show Bytes 2 response.(please refer picture file)
180605 : [PVT] Somtimes, power button can not work.

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ

===============================================================
    S2N AST2400 BMC FW v3.07 release note
===============================================================
BMC FW Version: v3.07
Date:			2016/05/12
Hardware Platform:	AST2400
Quanta Subversion Revision: 49994
Associate Platform:
  Suggestion BIOS Version:		3B02 or above

Utility:
1. Yafuflash (version 4.16.04)

Firmware Images:
   S2N_2400_v307.bin 	with checksum-32 0x54FEB316
   S2N_2400_v307.bin	with MD-5 0xF48CF5D6C145CA00300BBBCDEA129648
   S2N_2400_v307.bin_enc	with checksum-32 0x54FEF2FD
   S2N_2400_v307.bin_enc	with MD-5 0xB72D63D51C149659B8B264B6746C71BB
FSC version: 

Bug Fix:
179236 : [PVT][SNMP] SNMPv3 user cannot be add in MibBrowser
179066 : PVT]Suggest align the SEL.txt / SEL_Hex.txt format as S3A, that will easier to check the SEL download files.
178763 : [PVT]Use SNMP to get Fan sensor status will show Unknown or empty.
176858 : [PVT] The WEBUI default configured alert policy conunt mismatch BMC Standard SPEC V0.25(P64) defined.

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ

===============================================================
    S2N AST2400 BMC FW v3.06 release note
===============================================================
BMC FW Version: v3.06
Date:			2016/04/29
Hardware Platform:	AST2400
Quanta Subversion Revision: 49669
Associate Platform:
  Suggestion BIOS Version:		3B02 or above

Utility:
1. Yafuflash (version 4.16.04)

Firmware Images:
   S2N_2400_v306.ima 	with checksum-32 0x550D0D64
   S2N_2400_v306.ima 	with MD-5 0x22C9BA2F3FAB39CF614E9A46FCC9B383
   S2N_2400_v306.ima_enc 	with checksum-32 0x550D520E
   S2N_2400_v306.ima_enc 	with MD-5 0x4D77DC47E6F359D810B98CE24791527B
FSC version: 

Bug Fix:
179326 : [PVT]Use SNMP to get CPU / DIMM information will not match BMC Web UI Component.
179074 : [PVT]The Fan sensor's severity is Unknown and the description is undefined Sensor Specific event
178914 : [PVT]The SUT unable boot up after BIOS update via BMC Web-UI.
176864 : [PVT] The Script will failed during 4 loops when execute the ME Cold Reset test.


New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ


===============================================================
    S2N AST2400 BMC FW v3.05 release note
===============================================================
BMC FW Version: v3.05
Date:			2016/04/14
Hardware Platform:	AST2400
Quanta Subversion Revision: 48085
Associate Platform:
  Suggestion BIOS Version:		3B02 or above

Utility:
1. Yafuflash (version 4.16.04)

Firmware Images:
   S2N_2400_v305.ima 	with checksum-32 0x552864B6
   S2N_2400_v305.ima 	with MD-5 0x5C0304E8CCE5AF5C82C0B64237F4B930
   S2N_2400_v305.ima_enc 	with checksum-32 0x55289CE9
   S2N_2400_v305.ima_enc 	with MD-5 0x078EFE53B6E2E99957015558C3574616

FSC version: 

Bug Fix:
178562: The BMC default username/password should be OCPQ/OCPQ for OCP Platform
178192: [PVT]The BMC Web UI Fan Present status is ''f a n fan'' (0x800F)
177433: [S2N] Update BMC under OS will show some abnormal info.
177432: [S2N] BMC dashboard show abnormal BIOS version after update BMC under OS.
177381: [S2N] BMC dashboard sensor reading is zero. Please refer attachment.
177326: [S2N] Dashboard show firmware revision not correct. please refer attachment.
176858: [PVT] The WEBUI default configured alert policy conunt mismatch BMC Standard SPEC V0.25(P64) defined.
176849: [PVT] The BMC get SOL information mismatch BMC Standard SPEC V2.05 defined.(P125)
176831: [PVT] Cold reset BMC, SEL logged some unknown events. (shared-NIC)
176827: [PVT] The BMC V3.03 package didn't follow QCT std rule. Please refer attachment file "RR10 rule".
176751: [S2N] One SUT BMC SEL logged ''Fan Present Deasserted/ Asserted'' event during OS reboot cycle 60hrs.
176707: [PVT] The type of Airflow sensor mismatch between FW Spec v0.01 and ''sdr type'' read by IPMI command.(Please refer picture file)
176705: [PVT] The ''P0_VR_in_Temp'' and P1_VR_in_Temp'' didn't defined to Temperature Monitoring and Analog Sensors Table in the FW SPEC V0.01.

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account OCPQ/OCPQ

===============================================================
    S2N AST2400 BMC FW v3.04 release note
===============================================================
BMC FW Version: v3.04
Date:			2016/03/10
Hardware Platform:	AST2400
AMI Subversion Revision:
Quanta Subversion Revision: 47390
Associate Platform:
  Suggestion BIOS Version:		3B02 or above

Utility:
1. SOCFLASH (version 1.10.00)

Firmware Images:
   s2n_2400_304.bin 	with checksum-32 0x555058B2
   s2n_2400_304.bin 	with MD-5 0x52FCEAE76D6F64072E12F7FF0D7A4A29

FSC version: 

Bug Fix:
176566: [PVT] The HWCheck will record ''SMBiosTable'' and ''ACPITableCheck'' failed when excute AC Cycling test at 16 loops. 

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account qct.admin/qct.admin

===============================================================
    S2N AST2400 BMC FW v3.03 release note
===============================================================
BMC FW Version: v3.03
Date:			2016/02/26
Hardware Platform:	AST2400
AMI Subversion Revision:
Quanta Subversion Revision: 47114
Associate Platform:
  Suggestion BIOS Version:		3A01 or above

Utility:
1. SOCFLASH (version 1.10.00)

Firmware Images:
   s2n_2400_303.bin 	with checksum-32 0x556190E8
   s2n_2400_303.bin 	with MD-5 0x3D12D0CF69B5E94BBE5AE87CD993E1C4

FSC version: 

Bug Fix:

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account qct.admin/qct.admin

===============================================================
    S2N AST2400 BMC FW v3.02 release note
===============================================================
BMC FW Version: v3.02
Date:			2016/02/02
Hardware Platform:	AST2400
AMI Subversion Revision:
Quanta Subversion Revision: 46758
Associate Platform:
  Suggestion BIOS Version:		3A01 or above

Utility:
1. SOCFLASH (version 1.10.00)

Firmware Images:
   s2n_2400_302.bin 	with checksum-32 0x70738B4E
   s2n_2400_302.bin 	with MD-5 0xE116B9D27F4CFD391DB302B47248622D

FSC version: 

Bug Fix:

New Function:

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account qct.admin/qct.admin

===============================================================
    S2N AST2400 BMC FW v3.01 release note
===============================================================
BMC FW Version: v3.01
Date:			2016/01/14
Hardware Platform:	AST2400
AMI Subversion Revision:
Quanta Subversion Revision: 46415
Associate Platform:
  Suggestion BIOS Version:		3A01 or above

Utility:
1. SOCFLASH (version 1.10.00)

Firmware Images:
   s2n_2400_301.bin 	with checksum-32 0x7473E24B
   s2n_2400_301.bin 	with MD-5 0x19B163DBAFEA6754B7C6DA3532FE603A

FSC version: 

Bug Fix:

New Function:
1. For S2N build

Known Issues:

Notice:
1. The released FW image file is used for:
  a) using socflash under LINUX to update.    
  b) using flash writer to pre-program FW into flash before mount on MB in FACTORY.
2. Default account qct.admin/qct.admin

