SPLBPD-505,Cell 'Q_cap':For logical part Q_CAP, pack type 0402LF is present in the chips.prt file but missing in the part table file. Add PTF rows for that package to ensure that you can instantiate the package.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 0603 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 0402 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 1206 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 0805 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 0805_FAC is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 0201 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type 1808 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0402 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0603 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0402_SEL is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0805_SEL is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0805 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C1812 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C1206 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type THLF is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C0201 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C1808 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C1210 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
SPLBPD-506,Cell 'Q_cap':For logical part Q_CAP, pack type C2220 is missing in chips.prt but present in the part table file. The default package will be assigned in chips.prt during packaging. If this is not desired, specify the pack type on the General page of the Package Editor.,Warning
