===============================================================
    F09B CPLD V03 release note
===============================================================
CPLD FW Version: 03
Date: 2019/03/28
Hardware Platform: LCMXO2-1200UHC
Firmware Images: GPv2_CPLD_JTAG_MUX_VCCIO1-5_P1V8_03_signed.bin
jed file: GPv2_CPLD_JTAG_MUX_VCCIO1-5_P1V8_03.jed

Changed/Added:
1. All UART TX(CPLD UART output)/RX(CPLD UART input) have internal pull-UP setting.


Note:
1. Bin file is for BMC command updating, jed file is for CPLD dongle and supplier updating.
2. jed file checksum is B39C, bin file checksum is 5A110.
3. If you want to use BMC command UART selection feature, you need to update CPLD to V03.


===============================================================
Previous Version Change/Added:

CPLD FW Version: 02
Changed/Added:
1. Add one reserved path from PCIe Switch UART to CPLD.

Note:
1. Version 01 and 02 can be updated through BMC command.
2. Bin file is for BMC command updating, jed file is for CPLD dongle and supplier updating.
3. Version 02 is for EVT2 build.
4. jed file checksum is C8C2, bin file checksum is 5D9D5.

-----------------------------------------------------------------------

CPLD FW Version: 01
Changed/Added:
1. CPLD setting I/Os HYSTERSIS LARGE & CLAMP set to OFF to filter power noise.
